Drivers & Pullers


	Hydraulic Tools 3810 SE Naef Road • Milwaukie, Oregon 97267-5623

Earth Augers - Ground Rod Drivers - Post Drivers - Post Pullers

EA08 Earth Auger

The Stanley EA08 Earth Auger is used for a wide variety of earth boring appliction. The EA08 can be operated with two people or by one person using the torque tube. Stanley EA08 features are:

• 7-9 gpm (26-34 lpm) operating range.
• Output torque 250 ft. lb. / 339 Nm
• Reversable.
• HTMA quick disconnect couplers.
• Torque tube for one-man operation.
• Dead-man type ON/OFF control.

EA08 with Torque Tube
(auger not included)

For more detailed specifications, click on the model number.

Model	Weight	Length	Width	Auger Size	Auger Connection
EA08101A EA08102A	47 lb / 21 kg 47 lb / 21 kg	11 in. / 30 cm 11 in. / 30 cm	46 in. / 117 cm 46 in. / 117 cm	Up to 18 in. dia., 42 in. long - 15 in. extensions	1-1/4 in. square fem 1-3/8 in. hex male

GD50 Ground Rod Driver

The Stanley GD50 Ground Rod Drivers drive 1/2 to 1 inch rod from the top of the rod. A valve, in-line on the hoses, permits control of the GD50 while it is slung to the top of the rod. Stanley GD50 features are:

• 5-9 gpm (19-34 lpm) operating range.
• In-line valve on hoses for ON/OFF control.
• Assist handles.
• Lifting eye.
• HTMA quick disconnect couplers.

GD50 Ground Rod Driver

For more detailed specifications, click on the model number.

Model	Weight	Length	Width	Rod Size	Features
GD50132RF GD50133RF	52 lb / 24 kg 52 lb / 24 kg	25 in. / 65 cm 25 in. / 65 cm	16 in. / 41 cm 16 in. / 41 cm	1/2-5/8 in. dia 3/4-1 in. dia	in-line valve & hoses in-line valve & hoses

PD45 Post Driver

The Stanley PD45 Post Driver will drive #2, #3, & #4 lb/ft "U" channel, #3 & #4 Strong Back "U" channel, #1 delineator, up to 2-5/8 inch round, or up to 2-1/2 inch square posts. Stanley PD45 features are:

• 7-9 gpm (26-34 lpm) operating flow.
• Lifting eye.
• ON/OFF trigger next to guide handle (model dependent).
• Hose whips.
• Nitrogen charged accumulator.
• Guide handles.

PD45 Post Driver

For more detailed specifications, click on the model numbers.

Model	Weight	Length	Width	Features
PD45131 PD45132 PD45132G	65 lbs / 29 kg 65 lbs / 29 kg 65 lbs / 29 kg	30 in. / 76 cm 30 in. / 76 cm 30 in. / 76 cm	10 in. / 25 cm 10 in. / 25 cm 10 in. / 25 cm	In-line valve, hose, couplers ON/OFF trigger handle ON/OFF trigger handle, extended anvil for driving posts withing 4 inches of ground

PP10 Post Puller

The Stanley PP10 Post Puller is the ideal tool for pulling any type of post up to 8 inches wide. Stanley PP10 features are:

• 3-9 gpm (11-34 lpm) operating range.
• 9800 lb pulling force.
• Carrying handle.
• UP/NEUTRAL/DOWN control valve.
• Built-in grips for "U" channel posts.
• Chain & pins for irregular & perforated posts.

PP10 Post Puller

For more detailed specifications, click on the model number.

Model	Weight	Length	Width	Capacity	Features
PP10100	70 lbs / 32 kg	13 in. / 32 cm	14 in. / 36 cm	up to 8 in. wide post	HTMA Couplers



	Copyright © The Stanley Works 2003• All Rights Reserved